Designing a head expander can feel like a careful balancing act. It needs to be large enough to support the test article, stiff enough to maintain control, and strong enough to withstand demanding vibration environments, all while remaining light enough not to compromise shaker performance. The good news is that

Emphasis on MultiPoint Response Control and Force Limited Vibration Testing 1. Introduction Single axis electrodynamic shaker testing is widely used to qualify aerospace, automotive, and electronic hardware. While this approach is well established, traditional acceleration-controlled testing does not always represent real operational conditions. The interface between the shaker and the

Vibration testing on an electrodynamic shaker is a standard part of product qualification, yet critical details are often overlooked. Many test failures and even false passes can be traced back to missing fundamentals.  Before you press “Run” on your next shaker test, take a moment to review these six key tips. They can

Getting accelerometer placement right is one of the most critical aspects of any vibration test. It directly affects what the controller “sees,” how the shaker responds, and ultimately whether your results are valid or misleading. The challenge is that most test standards do not clearly define where sensors should be

Conducting sound measurements requires a sound level meter of course, but the sound level meter itself is only one of the many things you need to remember when on a measurement job. In this checklist, we have collected 18 tips to help you get successful measurement results. Setting up your

After a short, well-deserved break, we are recharged and ready to embrace 2026 with renewed energy and focus. A new year brings fresh challenges and exciting opportunities, and as a team, we are eager to explore them together. As January comes to an end, TANDM is in full swing. We

We recall entering 2025 with doubt in our minds, quite apprehensive of what lay ahead. Now, as we look back on our 2024/2025 financial year, the picture confirms our doubts and remain dominated by the political tensions locally and abroad. Our economy continues to face significant challenges, and uncertainty remains

Over the past few weeks, the TANDM team had the privilege of hosting our annual TCC25 event in Somerset West and Pretoria, and what an unforgettable experience it was. On 20 November we welcomed attendees to the elegant Lord Charles Hotel in Somerset West, and on 25 November we continued

Micro-Epsilon produces modern and powerful infrared pyrometers which can be used for non-contact measurements of surface temperatures from -50 °C to +1100 °C. Boasting high precision across their range of pyrometers and even special models for applications involving high temperature metals (up to +1600 °C), these sensors are applicable to

Extreme Conditions and Reliable Results through Effective Maintenance and Calibration TANDM Systems understand that the effectiveness and accuracy of component testing processes rely on the maintenance and calibration of test chambers. The most effective strategy for maintaining test chambers is to perform maintenance and calibration together. Maintenance involves checking for